How To Port Forward

    Share
    avatar
    Ro'kenrontyes
    Superman
    Superman

    Posts : 14
    Join date : 2013-10-11
    Age : 28
    Location : Georgia

    How To Port Forward

    Post by Ro'kenrontyes on Wed Oct 23, 2013 6:44 pm

    1.)Start>Run type cmd and hit ok. A command Prompt Will Appear.

    2.)In the Command Prompt Type ipconfig. and it will show something like this:


    Connection-specific DNS Suffix  . : gateway.*****.net
    IP Address . . . . . . . . . . . . . . . : 192.168.1.69
    Subnet Mask  . . . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . . . : 192.168.1.254


    Type in the Default Gateway address into your browsers URL bar and hit enter. Most routers require a Log-in. If you don't know it, check underneath your router or call Your ISP's Customer Service.

    Once you are inside your router you'll want to Port Forward. Navigate to the PortForward tab. Most routers have either Port Forward or Virtual Servers.

    There should be a section that says something like:[b]Active Forwarding Rules.

    You should enter the information as follows:
    Name:DC
    Start Port:200
    End Port:200
    Protocol:Both
    Your Local IP Address:192.168.1.254

    Now you go to:canyouseeme.org - Type in 200 and it should say:

    Success: If you forwarded the port correctly. or
    Error: If you did not.

      Current date/time is Wed Jun 28, 2017 6:00 pm